W1209 Blue/Red light Heat Cool Temp Thermostat temperature control switch DC 5V 12V temperature controller thermometer thermo

Description

Note:

The board of this product is uniformly printed with 12V, but in fact it has 5V/12V/24V voltage (order according to your needs). If you mind this printing, please do not place an order.

Specification:

Temperature range:-50 -110°C

Dimensions: 48.5 * 40mm

Temperature control mode: ON / OFF

Resolution:When temperature is 0.1°, the resolution is -9.9 -99.9, other temperature segment is 1°C

Control accuracy: 0.1 °C

Hysteresis accuracy: 0.1°C

Refresh rate: 0.5S

High temperature protection: 0 -110°C

Supply voltage: DC 12V 5V 24V AC 110-220V（Need to connect transformer）

Static current: ≤ 35MA, attract current ≤ 65MA

Output voltage: DC 12V 5V 24V AC 110-220V（Need to connect transformer）

Output power: 20A relay

Measurement input: NTC (10K 0.5%) Waterproof Sensor

Environmental requirements: -10 -60°C ,Humidity 20% -85%

Probe length: 30 cm

How to use:

Connect the power supply and the load, you can supply to the controller, is displayed as a measured temperature

Press the SET button, the display flashes the temperature,

Press – to set the desired temperature,

After setting press SET to confirm return,

The controller automatically performs the relay by setting off!

Lights, LED status descriptions:

Indicator: Off The relay is switched off, Always indicate the relay is closed.

LED: Shows LL is the sensor open, showing ?HH is out of range, the thermostat will be forced to close the relay, the display — as high temperature protection.

Package Included:(Depending on your choice)

1 x 1W1209 Thermostat Temperature Control Switch Module with Waterproof Thermostat NTC Sensor Probe

1 x W1209 case (The shell is a DIY kit, you need to assemble it yourself)

1 x 30cm NTC Sensor Probe